Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: Nero and XP assistance required




  1. #1

    Default

    G'day All. Got a little prob that has me stumped !
    I have Nero [latest version] and installed WNASPI32dll as per instructions from the Ahead site. Have burnt a few CD's with no probs but today have made a few coasters. Burnt till about the 10% mark and then the system just re-booted by itself.
    I havn't changed any setting re buffer/pagefile etc etc, all are at default.
    The error log is as follows;

    Sunday, January 13, 2002 EventSyste m The COM+ Event System detected a bad return code during its internal processing. HRESULT was 80070422 from line 44 of d:\nt\com\com1x\src\events\tie r1\eventsystemobj.cpp. Please contact Microsoft Product Support Services to report this error.
    Sunday, January 13, 2002 VSS Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x80040206.

    I then removed the aspi layer and used aspi force to intall again with the same results. Just after re-installing then ran aspi check for this result;

    LOG0143: ************************************************** ***************
    LOG0144: Starting ASPICHK installer on Sun Jan 13 13:07:13 2002
    ASPICHK0438: OS = Windows NT (5.01.2600)
    UPGRADE1004: c:\windows\system32\wnaspi32.dll dated 01/10/2002 23:01:24, 155715 bytes.
    UPGRADE1062: c:\windows\system32\wnaspi32.dll version 2.0.1.41
    UPGRADE0965: File c:\windows\system\winaspi.dll does not exist
    UPGRADE0369: No existing file to compare, upgrade recommended
    UPGRADE0965: File c:\windows\system32\drivers\aspi32.sys does not exist
    UPGRADE0369: No existing file to compare, upgrade recommended
    UPGRADE0965: File c:\windows\system\wowpost.exe does not exist
    UPGRADE0369: No existing file to compare, upgrade recommended
    ASPICHK0522: Inconsistent version numbers among components
    ASPICHK0592: ASPI installation has problems
    LOG0218: Closing installer log on Sun Jan 13 13:07:13 2002
    LOG0219: ************************************************** ***************

    So Gents, any guiding hands would be greatly appreciated


    AMD T-Bred 2600+
    Epox 8RDA3+ M/B
    Thermaltake Volcanoe 7+
    256 PC 2700 DDR @ 333 (CL2.5) X 2
    80 GB Seagate 7200 X 2
    Saphire Raedon 9700 Pro 128 MB
    HP 9100 Internal writer
    19" monitor
    Nortel Cable Modem [100]
    Windows XP-Pro
    Eski full of Cold Stubbies

  2. #2
    Join Date
    Mar 2004
    Posts
    2,910

    Default

    hmm i don't think nero uses aspi to burn..dunno, xp doesn't have aspi btw..

  3. #3

    Default

    G'day again, just checked my Event Viewer and by Geez, there seems to be a lot of error reporting going on lol.
    I need a tad on info on the following 2 errors which re-appear quite a few times.

    "The UPS Service is not configured correctly"

    and for the second;

    "AMLI:APCI BIOS is attempting to read from an illegal IO port address (0X71), which lies in the 0X70 -0X71 protected address range. This could lead to system instablility. Please contact your system vendor etc etc"

    These events appear reasonably consistant with the times I am attampting to burn a CD, when the system boots by itself.
    Any ideas appreciated. Ta gents.
    This is driving me to
    AMD T-Bred 2600+
    Epox 8RDA3+ M/B
    Thermaltake Volcanoe 7+
    256 PC 2700 DDR @ 333 (CL2.5) X 2
    80 GB Seagate 7200 X 2
    Saphire Raedon 9700 Pro 128 MB
    HP 9100 Internal writer
    19" monitor
    Nortel Cable Modem [100]
    Windows XP-Pro
    Eski full of Cold Stubbies

  4. #4

    Default

    i would say xp could be having driver issues with your chipset, its worth telling us what your exact configuration is so we can delve into this further...

    as for whoever said nero doesn't use aspi layer. pfft

    i pity the f00..
    if you have applied all your updates from microsoft and do have the latest version of nero, i would suggest just re-installing your m/b drivers, or something of the like, as it seems to be that the problem is not directly related to nero, but more, only emphasised by it...

    the ups message is just the UPS service is set to auto and u haven't got it monitoring a valid com-port

    just go to service manager and set the UPS service to "manual"


    i would suggest also a re-install of the OS (pending on hardware info) and disable the HAL / ACPI use/support, its a pain...
    sKuLLsHoT
    www.morb.ath.cx

  5. #5

    Default

    Ta for your efforts from Windy Warrnambool.
    The UPS in services is indeed already set to manual.

    If I go power options/UPS, there is no device selected and it tells me the UPS service is currently stopped.

    I have the latest drivers from Via for my M/board, think its ver 4.37.

    I have the latest ver of nero and am up to date with updates from MS.

    Where can i find the HAL / ACPI use/support option?

    Someone suggested it may be a bad sector on a hard drive {Nero is installed in "C", and it fails when trying to burn from "E" - further to that after it re-boots it usually automatically scans "E" as it may contain errors"}

    Scan Disc obviously dosnt fix whatever it is, anyother way to check for bad sectors?

    Can list more details about my system mate, what is it you wish to know? And once again, thanks for your efforts:D

    Someone sent me this, but It it a bit beyond me
    http://www.microsoft.com/hwdev/onnow/BIOSAML.htm
    AMD T-Bred 2600+
    Epox 8RDA3+ M/B
    Thermaltake Volcanoe 7+
    256 PC 2700 DDR @ 333 (CL2.5) X 2
    80 GB Seagate 7200 X 2
    Saphire Raedon 9700 Pro 128 MB
    HP 9100 Internal writer
    19" monitor
    Nortel Cable Modem [100]
    Windows XP-Pro
    Eski full of Cold Stubbies

  6. #6
    Join Date
    Jan 2002
    Posts
    1

    Default

    Probably not a bad sector but the ACPI error you see was a common problem with XP and motherboards. Go to your motherboard manufacturer's website and see if there is a new BIOS for your board. Most have issued a BIOS fix for this problem.

    HTH!

    Chazz271

  7. #7
    Join Date
    Nov 2001
    Location
    Bendigo Australia
    Posts
    1,788

    Default

    and with the latest version of nero u don't need to install anything else - it runs fine

  8. #8

    Default

    Ta Kheldar;) , hehe bendigo hey!, was up there a few weeks ago.

    Well mate the plot thickens, last few times on burning attempts to boot , just an error message.
    -----------------------------------------------------------------------------------
    Windows XP 5.1
    WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/23/1997 11:00:00 AM
    ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 1/17/2002 7:38:54 PM
    Nero Version: 5.5.6.4
    Recorder: <HP CD-Writer+ 9100> Version: 1.0a - HA 1 TA 1 - 5.5.6.4
    Adapter driver: <atapi> HA 1
    Drive buffer : 4096kB
    Bus Type : default (0) -> ATAPI
    CD-ROM: <E-IDE CD-ROM 50X L> Version: 13 - HA 1 TA 0 - 5.5.6.4
    Adapter driver: <atapi> HA 1
    Bus Type : default (0) -> ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST313032A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : E-IDE CD-ROM 50X L atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HP CD-Writer+ 9100 atapi Port 1 ID 1 DMA: On
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 48234496 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 383MB (392692kB)
    Free physical memory: 160MB (163860kB)
    Memory in use : 58 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Wizard: On

    Audio-CD
    17.1.2002
    --------------------------------------------------------------------------------------And then at the end of the "attempted burn"
    ---------------------------------------------------------------------------------------8:56:46 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1203
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01FC4538
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5D 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xA0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x24 0x00

    8:56:46 PM #21 mmc -1066 File ThreadedTransferInterface.cpp, Line 1394
    Invalid field in command

    8:56:46 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1394
    Could not perform start of Disc At Once

    8:56:46 PM #23 Phase 38 File dlgbrnst.cpp, Line 1436
    Burn process failed at 4x (600 KB/s)

    8:56:46 PM #24 Text 0 File Scsicmd.cpp, Line 371
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated
    ------------------------------------------------------------------------------------
    If you can make head or tails of that please do mate, I'm all ears !
    AMD T-Bred 2600+
    Epox 8RDA3+ M/B
    Thermaltake Volcanoe 7+
    256 PC 2700 DDR @ 333 (CL2.5) X 2
    80 GB Seagate 7200 X 2
    Saphire Raedon 9700 Pro 128 MB
    HP 9100 Internal writer
    19" monitor
    Nortel Cable Modem [100]
    Windows XP-Pro
    Eski full of Cold Stubbies

  9. #9
    Join Date
    Feb 2002
    Posts
    25

    Default

    1) Regarding the ASPI package, I'd say uninstall it. Nero needs nothing in addition in order to write. After you uninstall it, do a reinstallation of Nero
    2) Check the MB vendor's website, to get a new BIOS, which fixes the ACPI errors, or change the HAL to Standard PC.
    3) Go to Windows Update and get the CD burner update (if you haven't got it yet)

    HAL: Hardware abstraction layer. Unfortunately, windows uses that as a base, therefore (in theory) you cannot change HAL without reinstalling XP. I think, however, there is a "quick and dirty" method for switching from ACPI HAL to Standard PC HAL. DO a search in Google or/and the MS Knowledgebase for HAL change.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •